Length: 3 1/2 inch (9cm) Weight: 1 1/8 oz (32g) Depth: Sinking Hook Size: 4
Features: wLure RealSkin Technology Tank Tested Long Casting Saltwater Use High Quality ABS Construction Cutting Blade Black Nickel Round Bend Treble Hooks Epoxy Coating on Finish
Our lures are factory adjusted for average performance, you may need to tune your lures to get their best performance in water.
Before first time use
You may need to drop extra glue in the eyelets of hooks and tow point. It is helpful to seal your lure completely.
When you want to tune your lure? If your lure is not swimming straight like pulling to one side, swimming on the surface, rolling in the water. You may need to tune your lure.
How to tune your lure? Simply bending the tow point on the bib or nose of the lure to the direction the lure needs to go to swim straight, use long nosed pliers to do this and bend it a little bit at each time. Bend it, re-test it, bend it, re-test it and keep doing this until you get your lure goes straight. Your last bend will be so small you won't even be able to see it. The better you make this adjustment the better the lure will run.
The rules If the lure swims to LEFT side, bend tow point to the right. If the lure swims to RIGHT side, bend tow point to the left.
Warning: This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. https://www.p65warnings.ca.gov/
Looks good. Not that bright in the water looking down on it. The lure has too much epoxy at nose. They should never dip dry on hangers, but should have used a turner. Had to remove it so it won't bother the swim, which caused greying at the core. Had to reseal that area. The lure swims not as I thought as the wiggle is too labor/slow for a vibration lure. Still runs true and good lure.